This has to be the strangest product ever. BUT Man oh MAN it has some flair to it.
No 2 pieces will be the same.
No 2 pieces will be the same.
- 1. Compatible with Craft Cutters, Die Cutters, Sign Plotters, etc.
- 2. Mirror/Reverse your image design.
- 3. Place vinyl (gloss side) onto the cutting mat.
- 4. Adjust proper blade speed and cutting pressure.
- 5. Weed all of the excesses slowly, leaving the delicate design letters or graphics.
- 6. Make sure the finished product faces the right way once ironed onto your fabric.
- 7. Lay out the fabric. Place the t-shirt or fabric on a hard, flat clean dry surface.
- 8. Place cardboard to protect the transferred image onto both sides of the t-shirt.
- 9. Set a heat press machine at 135℃
- 10. Press it only for 8 seconds at medium pressure.
- 11. Iron on the vinyl gloss side. Do not use a steam iron.
- 12. Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
- 13. Wait for the vinyl to COOL and gently peel off backing after a few minutes